6-7
Cisco uBR-3x10 RF Switch Hardware Installation and Cabling Guide
OL-1984-06
Chapter 6 Troubleshooting
Troubleshooting the Installation and Setup
Cisco uBR 3x10 RF Switch Slot Information
Table 6-6 lists the RF modules and the ports assigned to each module.
Tip The modules are listed as seen from the front of the RF switch.
8
Figure 6-3 RF Switch from Front
Table 6-6 Switching Matrix for the Cisco uBR 3x10 RF Switch (Upstream and Downstream Modules)
RFS
Module Working Ports PROTECT Ports Type
RFS
Module Working Ports PROTECT Ports Type
2 1H—8H P1H, P2H
1
1. P2 is used only when the switch is in 4 + 1 mode.
upstream 1 1A—8A P1A, P2A upstream
4 1I—8I P1I, P2I upstream 3 1B—8B P1B, P2B upstream
6 1J—8J P1J, P2J upstream 5 1C—8C P1C, P2C upstream
8 1K—8K P1K, P2K upstream 7 1D—8D P1D, P2D upstream
10 1L—8L P1L, P2L upstream 9 1E—8E P1E, P2E upstream
12 1M—8M P1M, P2M downstream 11 1F—8F P1F, P2F downstream
14 not used — — 13 1G—8G P1G, P2G downstream
103287
Captive screw Captive screw
