52 Cisco Systems Intelligent Gigabit Ethernet Switch Module for the IBM Eserver BladeCenter System Message Guide
%Error:Policer Configuration Incorrect for
this interface. Check the policer rate in
policy-map :[policy-map name], class-map
:[class-map name]. Please choose either
[lower
rate] or [upper rate] (bits per second) as
the
policer rate
This error message means that the granularity of the policer
rate in the policy map is 1 Mbps.
Change the policer rate to either of the suggested values.
%Error:The name '[aclname]' has been used
for
ACL of another type
This error message means that the name on the MAC
extended ACL might have been used in another named ACL
that is not a MAC extended ACL.
Table 4. Common ACL Error Messages (Continued).
Error Message Explanation and Suggested Solution
