42 Cisco Systems Intelligent Gigabit Ethernet Switch Module for the IBM Eserver BladeCenter System Message Guide
SW_VLAN-4-STARTUP_EXT_VLAN_CONFIG_FILE_FAILED: Failed to configure extended range VLAN from
startup-config. Error [chars].
Explanation This message means that the VLAN software failed to use an extended-range VLAN
configuration from the startup configuration file. All extended-range VLAN configurations are lost after the
system boots up. [chars] is a description of the error code.
Response No action is required.
SW_VLAN-4-VTP_INTERNAL_ERROR: VLAN manager received an internal error [dec] from vtp function
[chars]:[chars].
Explanation This message means that the VLAN manager received an unexpected error code from the
VTP configuration software. [dec] is the error code, the first [chars] is the VTP function, and the second
[chars] is the error-code description.
Response Find out more about the error by using the show tech-support privileged EXEC command and
by copying the error message exactly as it appears on the console or system log and entering it in the Output
Interpreter tool. Use the Bug Toolkit to look for similar reported problems. For more information about these
online tools , see the “Error Message Traceback Reports” section on page 9.
SW_VLAN-4-VTP_INVALID_DATABASE_DATA: VLAN manager received bad data of type [chars]:value [dec] from
vtp database function [chars].
Explanation This message means that the VLAN manager received invalid data from a VTP
configuration database routine. The first [chars] is the data type; [dec] is the inappropriate value that was
received, and the second [chars] is the VTP database function.
Response Find out more about the error by using the show tech-support privileged EXEC command and
by copying the error message exactly as it appears on the console or system log and entering it in the Output
Interpreter tool. Use the Bug Toolkit to look for similar reported problems. For more information about these
online tools , see the “Error Message Traceback Reports” section on page 9.
SW_VLAN-4-VTP_INVALID_EVENT_DATA: VLAN manager received bad data of type [chars]:value [dec] while being
called to handle a [chars] event.
Explanation This message means that the VLAN manager received invalid data from the VTP
configuration software. The first [chars] is the data type, [dec] is the value of that data, and the second
[chars] is the VTP event.
Response Find out more about the error by using the show tech-support privileged EXEC command and
by copying the error message exactly as it appears on the console or system log and entering it in the Output
Interpreter tool. Use the Bug Toolkit to look for similar reported problems. For more information about these
online tools , see the “Error Message Traceback Reports” section on page 9.
