A SERVICE OF

logo

8 Cisco Systems Intelligent Gigabit Ethernet Switch Module for the IBM Eserver BladeCenter System Message Guide
SEVERITY is a single-digit code from 0 to 7 that reflects the severity of the
condition. The lower the number, the more serious the situation. Table 2 lists the
message severity levels.
MNEMONIC is a code that uniquely identifies the message.
Message-text is a text string describing the condition. This portion of the message
sometimes contains detailed information about the event, including terminal port
numbers, network addresses, or addresses that correspond to locations in the
system memory address space. Because the information in these variable fields
changes from message to message, it is represented here by short strings
enclosed in square brackets ([ ]). A decimal number, for example, is represented
as [dec]. Table 3 lists the variable fields in messages.
SPANTREE Spanning tree “SPANTREE Messages” section
on page 32
SPANTREE_FAST Spanning-tree fast convergence “SPANTREE_FAST Messages”
section on page 38
SPANTREE_VLAN_SWITCH Spanning-tree VLAN switch “SPANTREE_VLAN_SWITCH
Messages” section on page 38
STORM_CONTROL Storm control “STORM_CONTROL Messages”
section on page 38
SW_VLAN VLAN manager “SW_VLAN Messages” section on
page 39
UDLD UniDirectional Link Detection
(UDLD)
“UDLD Messages” section on
page 43
UFAST_MCAST_SW UplinkFast multicast software “UFAST_MCAST_SW Messages”
section on page 44
Table 1. Facility Codes (Continued).
Facility Code Description Location
Table 2. Message Severity Levels .
Severity Level Description
0 – emergency System is unusable.
1 – alert Immediate action required.
2 – critical Critical condition.
3 – error Error condition.
4 – warning Warning condition.
5 – notification Normal but significant condition.
6 – informational Informational message only.
7 – debugging Message that appears during debugging only.
Table 3. Representation of Variable Fields in Messages .
Representation Type of Information
[dec] Decimal integer
[char] Single character
[chars] Character string
[enet] Ethernet address (for example, 0000.FEED.00C0)
[hex] Hexadecimal integer
[inet] Internet address