Filter
Top Products
97
Reset
If the issue cannot be resolved after taking the above corrective actions, reset the
main unit by following the steps below:
1 Unplug the AC adapter from the main unit.
2 Turn “OFF” the BATTERY switch. After about 5 seconds, turn the
battery switch “ON” again.
Settings won’t return to the initial state.
Execute “settings” - “restore original settings” to return to the factory defaults.
(>p.88)
!
Note
-If the built-in timer is reset and subscription cannot be played, connect the
gigabeat to the PC to synchronize with Windows Media Player 10.
The charge
indicator turned off
while the AC
adapter was
connected.
The charge is
automatically stopped
to limit the
temperature increase
in the gigabeat.
This is a safety feature.
Keep the gigabeat in the
charging operation.
Charging will resume
after a while.
> p. 21
The PC does not
recognize the
gigabeat.
The gigabeat is not
properly connected to
the PC.
Check the connection
with the PC. > p. 24
Issue Cause Solution Refer