Filter
Top Products
Installation and Maintenance
7
Installation
1. Remove unit and all packing materials from the carton. You should save packing materials in case unit needs
to be returned for service. If you do not wish to save the materials, please dispose of them properly.
2. Place the unit on a stable, level surface, close to an AC outlet, out of direct sunlight, and away from sources
of dust, dirt, heat, water, moisture, vibration, and strong magnetic fields.
3. After installing the backup (see below) and reading the Maintenance notes, plug the AC cord into an outlet.
“Sure Alarm” Battery Backup Installation
It is strongly recommended that 3 “AAA” batteries be installed into the unit, as directed below, in order to activate
the “Sure Alarm” Battery Backup. In the event that the power cord is disconnected or a power interruption
occurs, the “Sure Alarm” Battery Backup will maintain clock and alarm settings for the life of the battery, ensuring
that the alarm (buzzer only) will sound at the set time. Note: the backlight will not function while on battery power.
1. Gently turn the unit over and remove the battery compartment door.
2. Install 3 "AAA" batteries (alkaline is recommended for longer life), making
sure that the + and – ends match up with the diagram printed inside the
battery compartment.
3. Slide the battery compartment door back on, making sure the door locks
into place, and gently turn the unit over.
The display’s Battery Low Indicator will flash when no batteries are installed,
or when the batteries are weak or installed incorrectly.
Maintenance
1. Place the unit on a level surface away from direct sunlight or sources of excessive heat.
2. Protect your furniture when placing the unit on natural wood or wood with a lacquered or coated finish. A
cloth or other protective material should be placed between the unit and the furniture.
3. Clean the casing with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such
as thinner or similar materials, are not recommended as they may damage the surface of the case.
4. If the unit is not to be used for a prolonged period, remove the batteries to prevent possible corrosion. Should
the compartment become corroded or dirty, clean the compartment thoroughly and replace the batteries.
Battery Compartment