Filter
Top Products
39
EN
EN
Further information
• You can also change the language while a disc is
playing by pressing the INFO key and selecting
the icon for dialogues or for subtitles.
This choice is only valid for the disc if it has not
been removed from the disc drawer.
The menus of your DVD recorder do not
appear in the language you want
• Check that your language is available in the
settings menu. If not,choose another language.
You can’t access the selected menu, even
when you press OK
• If the name of the menu appears on a
transparent background, it means that the
corresponding menu or function is not
available.The Disc, Titles and Playlist menus
are contextual menus:they depend on
operations performed beforehand such as:
• Disc is only accessible if there is a disc in the
disc tray of your DVD recorder.
• Titles is only accessible once you have
recorded a TV program or video sequence
(from an external device).
Your DVD recorder menu disappears
• As with computers, your DVD recorder has a
screen saver which replaces the fixed menu by
a mobile THOMSON logo.Press on a navigation
key to bring back the fixed menu.
You can’t switch channels
• During the recording of a TV program (or video
sequence from a connected device), switching
channels is impossible.To change channels,you
have to stop the recording completely.
In quiet moments, you hear a slight hum
coming from your DVD recorder
• Your DVD recorder is equipped with a fan. It
switches on as soon as your DVD recorder is
turned on and produces a slight hum.
The TV guide (NAVICLICK) is not
displayed
• Downloading may be disabled.Make sure that
Off is not ticked.
• Does the channel broadcast a TV guide?
Other problems
Reconfiguring your player’s initial set-up
• Open the disc tray and make sure there is no
disc in it. Close the tray. Hold down the STOP
key of your DVD recorder,then press the
STANDBY/ON key by holding it down for 3
seconds, until
INIT is displayed on the screen of
your DVD recorder.The recorder switches off
after a few seconds;switch it back on.The
menu displayed on screen is the menu which
enables you to choose your DVD recorder’s
display language. It confirms that all settings
made since initial installation have been deleted.
The DVD recorder has been reconfigured as it
was when purchased (factory settings). Restart
the installation of your DVD recorder.
If you forget your password
• Open the player’s disc tray and ensure that
there is no disc on it.Close the tray.The player
menu is now displayed on the TV screen. Now
press the STOP key on your player and hold
the STOP key on the remote control unit
down for 3 seconds.The password that you
chose for parental control is cancelled.The
close padlowk on your recorder’s display
disappears.
To erase the hard disc
• Open the player’s disc tray and ensure that
there is no disc on it.Close the tray.The player
menu is now displayed on the TV screen. Hold
down the STOP key on your player and press
the DVD REC key for more than 3 seconds.
Some channels or radio stations have
numbers above 50 or 80.
• The procedure for installation encrypted
channels and radio stations (for which the
numbers are not commonly attributed)
allocates numbers from 80 for encrypted
channels and 50 for radio stations.
Other important information
For your safety
Never open the player or any of its components.
It can be dangerous for you or for certain fragile
components.You could receive an electric shock
or touch the laser beam. Do not place your eyes
close to the opening of the disc tray or any other
opening to look inside the player.
Disclaimer of warranty!
To the extent allowed by applicable law,
representations and warranties of non-
infringement of copyrights or other intellectual
property rights resulting from the use of this
product under conditions other than as specified
above, are hereby excluded.
02_DTH8657_en.qxp 10/05/06 14:13 Page 39