Filter
Top Products
32
Menus
Parental control
Your DVD recorder has a child lock function which enables you to restrict access to certain
DVDs.The discs whose content may be deemed unsuitable for your children will therefore not be
visible unless a code that you have previously chosen is entered.
Choose a play mode and confirm with
OK.
Note: the padlock tells you whether or not the DVD recorder is
locked.When the Lock function is activated, a padlock is
displayed on the DVD recorder display.
Locked: you must enter the secret code to play
the discs whose rating limits exceed the limit you
have allocated.
Unlocked: you dont need the secret code the play
the discs, even if you have set a rating limit.
Note:Your DVD recorder is delivered in the unlocked, position without any rating limit. If you want to use the
Child lock function, you have to set a rating limit and position the Lock, function on On.
Locking
1. The Lock line is already selected. Press OK to validate.
If no secret code has been chosen, your DVD recorder asks you to choose one.
2. Type four digits and confirm with OK.
Note: choose a four-digit number that you will be able to
remember easily or note it down.
3. The first time a confirmation of the code is asked for. Enter the code again,then confirm with OK.
Changing the code
To change the code, you must deactivate the Lock function to be able to return afterwards.
1. From the Parental Control menu enter the 4 figure code, then confirm with OK.
2. The Lock line is selected. Press OK.
3. Select No (deactivated) and confirm with OK.
4. Exit the menu by pressing 3 times on the RETURN key.
5. See steps 1, 2 and 4, 5, 6 to allocate a new password.
6. See the Locking paragraph to enter a new code.
Note: if you forget your secret code, see the Trouble Shooting Guide at the end of this manual.
MENU Setup OK Parental control OK
02_DTH8657_en.qxp 10/05/06 14:13 Page 32