Filter
Top Products
24
GB
Playing Back Messages (continued)
1 Tip
When fast playback is done to the end of the last message, “MSG. END” flashes
for 3 seconds and the OPR indicator lights up in green. (You cannot hear the
playback sound.)
If you keep pressing the jog lever down (.) while “MSG.END” is flashing,
the messages are played back rapidly, and normal playback will start at the
point you release the button. When “MSG. END” stops flashing and the OPR
indicator goes off, the unit will stop at the beginning of the last message.
If the last message is long and you wish to start playback at a later part of the
message, keep pressing the jog lever up (>) to go to the end of the message
and then press the jog lever down (.) while “MSG.END” is flashing to go
back to the desired point .
(For messages other than the last one, go to the beginning of the next message
and play backward to the desired point.)
Locating quickly the point you wish to start playback (Easy
Search)
When EASY-S is set to ON (page 59) in the menu, you can quickly locate
the point you wish to start playback by pressing the jog lever up or down
(>/.) repeatedly during playback or playback pause.
You can go back approx. 3 seconds by pressing the jog lever down (.)
once, or advance approx. 10 seconds by pressing the jog lever up (>)
once. This function is useful when locating a desired point in a long
recording.
Playing back a message repeatedly — Repeat Play
During playback, press the jog lever (x•B) for
more than one second.
“MSG.REPEAT“ will be displayed and the selected
message will be played back repeatedly.
To resume normal playback, press the jog lever
(x•B) again. To stop playback, press xSTOP.
Playing back the specified section repeatedly — A-B Repeat
You can specify the start (A) and end (B) points and play back the specified
section repeatedly (page 30).