Filter
Top Products
F:\SONY\5090433\GB\2639395241\2639395241HDPS-M10\01GB08C0502-
J.fm
masterpage:Right
45
Additional information
HDPS-M10
2-639-395-24(1)
• Affix the label so that it does not stick
out beyond the label area.
• When storing or carrying a “Memory
Stick”, keep it in a protective case.
• Do not touch the terminal of the
“Memory Stick” with anything,
including your fingers or metallic
objects.
• Do not strike, bend, or drop the
“Memory Stick”.
• Do not disassemble or modify the
“Memory Stick”.
• Do not allow the “Memory Stick” to get
wet.
• Do not use or store the “Memory Stick”
in locations subject to:
– Extreme heat, such as in a closed car
parked in the sun.
– Direct sunlight.
– Humidity or corrosive substances.
Notes on using “Memory Stick
Duo”
• Use a pointed object, such as a ballpoint
pen, to move the “Memory Stick Duo”
write-protect switch.
• Do not write forcefully on the “Memory
Stick Duo” memo area.
Notes on using the Memory Select
function
• You cannot use multiple memory blocks
simultaneously or continuously.
• Never operate with the Memory Select
switch when the “Memory Stick” is
inserted in the slot of the unit as it may
cause damage. Sony Corporation does
not guarantee such failure resulted from
the above operation.
• Make sure that the Memory Select
switch is properly positioned to the side.
When the switch is not positioned
properly, the unit may be damaged or
malfunction.
• Before inserting the “Memory Stick” in
the slot of the unit, make sure that the
memory you want to use is already
selected.
• A “Memory Stick” with the Memory
Select function allows the user to select
the internal memory of the “Memory
Stick” with the selector switch. Care
must be taken in the following cases as
the supported devices only detect the
selected memory:
– Formatting is only processed for the
selected memory.
– The remaining memory is only
indicated for the selected memory.
– The error display is only served for the
selected memory. It is detected
separately from the unselected
memory.
Maintenance
Cleaning the cabinet
Wipe the outside of the unit with a soft,
dry cloth. To remove stubborn stains,
moisten the cloth with a mild, neutral
detergent. Do not use solvents, cleaning
alcohol, benzene, or other substances that
may damage the finish.
Terminal
Write-protect
switch
Memo area