Filter
Top Products
14
F:\SONY\5090433\GB\2639395241\2639395241HDPS-M10\01GB05C02-J.fm masterpage:Left
HDPS-M10
2-639-395-24(1)
B
Preparations
Powering the unit
You can use the internal battery or the AC power adapter to power the unit.
If you want to use the unit without the AC power adapter, you must first charge
the internal battery of the unit. To do this, connect the supplied AC power
adapter as illustrated.
When the AC power adapter is connected to the unit, the internal battery starts
charging. A battery charge indicator appears on the display during charging.
When the battery is fully charged, the LCD display shows “FULL CHARGE”
before it turns off. The charging process takes about 4 hours at ambient
temperature.
Hint
The internal battery charges even when the unit is in use, as long as the AC power adapter is
connected. However, the charge time is considerably longer than when the internal battery is
charged as outlined above.
Notes
• Only use the supplied AC power adapter. Other power adapters do not work.
• If you use the unit under battery power at temperatures of 10°C (50°F) or less, you cannot
use the unit as long as normal. Normal operation of the unit under battery power is not
guaranteed at low temperatures; therefore, make sure that you connect the AC power
adapter.
• To maintain battery performance, make sure that you charge it periodically by connecting
the AC power adapter.
Charging the battery
To the AC outlet
To the
! (DC In) connector
Battery charging in progress Battery is fully charged