Filter
Top Products
38
Playing Discs
Playing Discs
When playing a disc, make sure that the MS
indicator is turned off (Disc mode).
To play a DATA-CD, see page 67.
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
1 Turn on your TV.
2 Switch the input selector on the TV
to the player.
When using an amplifier (receiver)
Turn on the amplifier (receiver) and
select the appropriate channel.
3 Press ?/1.
The ?/1 indicator (red) changes to green
and the front panel display lights up.
4 Insert a disc in the player.
If the MS indicator on the player is lit,
press MS to turn it off in stop mode. (Disc
mode)
5 Press N on the player or H on the
remote.
The player starts playback (continuous
play). Adjust the volume on the TV or the
amplifier (receiver).
After following Step 5
Depending on the disc, a menu may appear
on the TV screen. You can play the disc
interactively by following the instructions on
the menu. DVD (page 41), VIDEO CD (page
42).
To turn off the player
Press ?/1. The player enters standby mode
and the ?/1 indicator lights up in red. To turn
off the player completely, disconnect the AC
power cord. While playing a disc, do not
disconnect the AC power cord. Doing so may
cancel the menu settings. When you turn off
the player, first press x to stop playback and
then press ?/1.
Notes on playing DTS sound tracks on
a CD
• When playing DTS-encoded CDs,
excessive noise will be heard from the
x
?/1 button/indicator
N
H
x
AUDIO
?/1
MS
MS button/indicator
With the playback side
facing down
MS button/
indicator