Filter
Top Products
24
Step 2: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. The surround effects
you will enjoy depend on the connections and components you use.
Select a connection
Select one of the following connections, through .
* Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the double-D symbol are
trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories. All rights
reserved.
**“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Connection Components to be connected
(page 25)
TV (stereo)
(page 26)
Stereo amplifier (receiver)
(having L and R audio input jacks only, or having a digital input jack)
•2 speakers
(front L and R)
(page 26)
MD deck/DAT deck
(page 28)
AV amplifier (receiver) with a Dolby* Surround (Pro Logic) decoder
(having L and R audio input jacks only, or having a digital input jack)
•3 speakers
(front L and R, and rear (monaural))
•6 speakers
(front L and R, center, rear L and R, subwoofer)
(page 30)
AV amplifier (receiver) having a Dolby Digital or DTS** decoder, and
a digital input jack
•6 speakers
(front L and R, center, rear L and R, subwoofer)
A
D
A
B
B
C
D