Filter
Top Products
18
If you cannot operate the player with the remote
The player has 2 remote sensors, one at the top and one on the front (page 20). If one of the remote
sensor is exposed to direct sunlight or lighting apparatus, the remote may not operate correctly.
If this happens, select a remote sensor in the following way until you find one that works. (If the
MS indicator on the player is lit, turn it off by pressing MS.)
When the power is on and no disc is inserted in the player, press . for more than 2 seconds
while pressing x.
The selected remote sensor is displayed on the front panel display as follows:
* The default setting
Notes
• Do not leave the remote in an extremely hot or humid place.
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so may cause a
malfunction.
• If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage from
battery leakage and corrosion.
BOTH* (The player
receives the remote
signal at both remote
sensors.)
TOP (The player
receives the remote
signal at the top
remote sensor.)
FRONT (The player
receives the remote
signal at the front
remote sensor.)
t
t