Filter
Top Products
3
GB
GB
FR
DE
ES
NL
SE
IT
PT
NO
DK
FI
TABLE OF CONTENTS
Getting Started
Unpacking 3
Hooking Up the System 4
Basic Operations
Listening to the Sound 6
Adjusting the Sound 7
Operating Other Sony Components 8
Additional Information
Troubleshooting 9
Specifications 9
Welcome!
Thank you for purchasing the Sony
speaker system SA-F11.
The SA-F11 is an active speaker system
incorporating two front speakers and a
subwoofer.
When you connect this system to the
Sony CD/DVD player, DVP-F11, you
can enjoy 2.1-channel surround sound
even if you don’t have a receiver
(amplifier).
Using the “VES (Virtual Enhanced
Surround)” mode in the on-screen menu
of the DVP-F11 allows you to enjoy
virtual 3D sound even without rear
speakers. For details on the virtual 3D
sound, refer to the instructions supplied
with the DVP-F11.
Other components you can connect this
speaker system to:
– A DVD player equipped with a 5.1-
channel output jacks and on which
you can select whether the speakers
are connected to the unit or not.
– A DVD player equipped with a 2.1-
channel (2 front speakers and a
subwoofer) outputs.
About This Manual
Before operating the unit, please read
this manual thoroughly and retain it for
future reference.
Convention
The following icons are used in this
manual:
Z
Indicates that you can use the
remote to do the task.
z
Indicates hints and tips for
making the task easier.
Unpacking
Check that you received the following items with your speaker system:
• Audio connecting cord, 1.5 m (1)
• Speaker connecting cords, 2.5 m (2)
• Remote commander (remote) (1)
• Sony R6 (size AA) batteries (2)
• Foot pads (12)
Inserting batteries into the remote
Insert two R6 (size AA) batteries with the polarity matched to the + and –
marks on the battery compartment. When using the remote, point it at the
remote sensor g on the subwoofer.
z When to replace batteries
Under normal use, the batteries should last for about 6 months. When the
remote no longer operates the speakers, replace both batteries with new ones.
Notes
• Do not leave the remote in an extremely hot or humid place.
• Do not use a new battery with an old one.
• Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing
so may cause a malfunction.
• If you do not use the remote for an extended period of time, remove the batteries
to avoid possible damage from battery leakage and corrosion.