Filter
Top Products
NW-S603/S605/S703F/S705F/S706F.GB 2-887-743-13(1)
38
38
Adjusting the Eect of the Noise Canceling
Function
(Noise Cancel Control)
(NW-S703F/S705F/S706F only)
The player is designed to obtain the maximum effect of the Noise Canceling
function (
page 28), but you may be able to enhance the effect depending on
your ear shape or usage environment, or by increasing (or decreasing) the
sensitivity of the microphone installed in the headphones.
You can adjust the microphone sensitivity by the Noise Cancel Control
function. Adjust the function when the Noise Canceling effect is poor.
to
button
DISPLAY/HOME button
to
Shuttle switch
Notes
This function is only available with the supplied headphones.
The setting screen for this function appears only when the supplied headphones are
connected to the player.
The following operation is only available while in the play or stop mode or using the FM
tuner (NW-S703F/S705F/S706F only). However, this function is not available while in
the stop mode.
Press and hold the DISPLAY/HOME button until the HOME screen
appears.
Rotate the shuttle switch to select (Settings) and press the
button to conrm.
Rotate the shuttle switch to select “Advanced Settings>” and press
the
button to conrm.
Rotate the shuttle switch to select “Noise Cancel Control>” and
press the
button to conrm.
Rotate the shuttle switch to select the desired value and press the
button to conrm.
To return to the previous menu
Press the DISPLAY/HOME button.
Settings
Table of
Contents
Index
Menu