Filter
Top Products
14
Listening to music with your Network
Walkman
Charge the built-in rechargeable battery before use (page 12) and transfer audio files to your
Network Walkman.
Notes
• When using Network Walkman, be sure to disconnect it from the computer.
• For information on FM tuner operations, see “FM Tuner” (page 40).
1 Connect the headphones.
If playback does not start
Make sure that the Shuttle switch is not set to
HOLD (page 30).
To stop playback
Press the Nx button.
To adjust the volume
The volume can be set in the Preset and Manual
(pages 33 to 34).
z Tip
You can switch the display to Power Save or
Display OFF mode when you do not operate the
unit for a while (page 35).
1 Press the Nx button.
2 Press the VOL
+/– button to
adjust the
volume.
Shuttle switch
2 Start playback.
to
headphone
jack
To use the headphones extension cord
(NW-E505/E507)
Connect until it clicks into place.
Extension
headphone cord
If the repeat mode (page 21) is not set,
playback stops automatically after the last
song is played.
to
headphone
jack
GROUP
Normal
HOLD