Filter
Top Products
F:\Joutou\#4090332_Sony_LF-X\4103221121up\4103221121\4103221121LF-
X1\00GB05C01-WW.fm
masterpage: Left
LocationFreeTV
4-103-221-12(1)
34
Note
Do not remove the backing paper from the IR
Blaster yet.
When controlling two devices with the IR
Blaster, position the devices and the IR
Blaster as shown.
If the infrared receivers on two devices do
not line up and cannot be controlled with the
single supplied IR Blaster, you need to
purchase a plug adapter (not supplied) and
another IR Blaster. Connect the plug adapter
to the IR BLASTER port on the base station
and connect each IR Blaster to a port on the
adapter plug.
z Tips
• If the IR Blaster cable is too short, use the
extension cable (RK-G138, not supplied).
• Infrared receivers on Sony VCRs and other
products are identified with the symbol.
3
Open the [Settings] window and select [TV/
Video].
The [TV/Video] window appears.
4
Select [Remote Settings].
The [Remote Settings] window appears.
5
Select [Video 1] or [Video 2] according to
the input terminal to which the device is
connected.
The [Video 1] or [Video 2] window appears.
6
From the list in the upper part of the window,
select the make and type of the connected
device, then select [Power].
When you select a make, various types for
that make are displayed.
When the device is configured correctly, you
can turn it on and off by selecting [Power].
Use the sub-screen to confirm that the power
turns on and off.
If selecting [Power] several times does not
turn on and off the connected device, make
sure the make and type you have selected are
correct.
Notes
• Even if the power turns on and off correctly
with [Power], other buttons may not be
enabled. If this happens, select [Video 1] or
[Video 2] from the Index. With the on-screen
remote that appears when you touch the screen,
confirm that the buttons are enabled by
pressing them.
• Some devices may not have a [Power] button
(e.g. DVR). In this case, as well, use the on-
screen remote to display [Video 1] or [Video 2]
and confirm that the buttons are enabled.
IR Blaster
Infrared transmitter
Infrared receiver
IR Blaster
Infrared receivers
Select a make.
[Power] Select a type.