Filter
Top Products
11
Handling and operation
KH 2420
GB
IE
CY
Connecting an external speaker
If required you can connect an additional external speaker (with a 3.5 mm
jackplug) to the speaker connections
24
on the rear panel of the device.
Connecting the headphones
If required you can connect headphones (with a 3.5 mm jackplug) to the
headphone connection
23
on the rear panel of the device. The speakers
then switch off automatically.
Handling and operation
In this chapter you receive important information for the handling and operation
of the device.
Switching On and Off
Press the POWER/AL.OFF button to switch the device on.
The POWER/ST. LED
7
lights up green and the display
5
is activated.
Press the POWER/AL.OFF button
to switch the device off .
The POWER/ST. LED
7
goes out and in the display
5
is shown the time of
day and a programmed alarm time.
Setting the time
In order to set the time of day the device must be switched off .
Press the TIME SET button
4
. The time indicator in the display
5
blinks.
Press the SKIP+/HOUR button
14
to set the hours.
Press the SKIP-/MIN button
13
to set the minutes.
Press the TIME SET button or wait for approx. 10 seconds to confi rm the
time input. The time indicator stops blinking.
NOTICE
The time of day will reset to 0:00 if the device is disconnected from ►
the power source and no batteries have been inserted.