Filter
Top Products
10
Setting up and connecting
KH 2420
GB
IE
CY
Inserting the batteries
By inserting the batteries you can avoid the loss of programmed time of day and
alarm wake time in the event of a possible power outage. The batteries make
sure that the internal clock continues to run even during a power outage.
When power is restored the correct time appears automatically in the display
5
.
NOTICE
Display, Radio, CD player and alarm do not function in emergency operation. ►
Open the cover of the battery compartment
29
on the bottom of the device.
Insert 2 batteries type AA/LR6/Mignon (supplied) into the battery compart-
ment. Make sure that you observe the polarity as depicted in the battery
compar
tment.
Close the battery compartment by replacing the cover and allowing it to
lock into place.
Assembling the pedestal
You can set the device up with or without the pedestal
26
. For assembly of the
pedestal proceed as follows:
Insert the pedestal into the receptacle
30
on the bottom of the device.
To lock the pedestal turn it counter clockwise.
To unlock the pedestal (disassembly) turn it in a clockwise direction.
Providing mains power
Connect the connection cord to the mains power connection
27
on the rear
panel of the device.
Plug the mains power plug into a wall socket. The time of day will be shown
in the display
5
(0:00 o'clock).
USW wire antenna
For USW reception completely unfold the wire antenna
28
.