Silvercrest KH 2420 Clock Radio User Manual


 
12
Handling and operation
KH 2420
GB
IE
CY
Setting the display illumination
Press the DIMMER button
11
to set the display illumination.
Setting options: Bright/Dimmed/Off
Adjusting the volume.
With the VOLUME controller
18
set the desired sound level.
Automatic switch off ("SLEEP" function)
With the "Sleep" function the device switches itself off after a time lapse of
between 10 and 90 minutes.
Switch the device on and select the desired mode with the
AUX/RADIO/CD switch
19
.
Press the SLEEP button
9
repeatedly to set the desired time.
Setting options: 90, 80, 70, 60, 50, 40, 30, 20 or 10 minutes.
After three seconds the selected setting is saved.
Press the SLEEP button
9
again to switch off the "Sleep" function.
Programming alarm wake times
When programming the alarm wake time you can select whether, at the
programmed time, an alarm tone should sound or the radio or CD player
should start playing. In order to programme an alarm wake time the device
must be switched off .
NOTICE
If, during alarm wake programming, no button is pressed for approx.
10 seconds the alarm will activate with the current settings.
T
wo diff erent alarm wake times (Alarm 1/Alarm 2) can be programmed.
Press the AL1.SET button
6
/AL2.SET button
8
. The time indicator in
the display
5
blinks and the indicator AL 1/AL 2 appears.
Press the SKIP+/HOUR button
14
to set the hours.
Press the SKIP-/MIN button
13
to set the minutes.