Sharp MD-MT821 MP3 Player User Manual


 
Error messages Meaning
Remedy
Batt EMPTY
l The battery run down.
l Charge the rechargeable battery or
(Lo BAT-T)
replace the alkaline battery (or use the
AC adaptor for power
BLANK DISC
l Nothing
is
recorded.
l Replace the
disc
with a recorded disc.
(BLANK)
Can’t COPY
l No copy can be made because of the
l Record
using
the analog cable.
(Not REC)
SCMS copyright system.
Can’t EDIT
l A track cannot be edited
l Change the stop
position
of the track
and then try editing
It.
Can’t REC
l Recording cannot be performed
(Not REC)
correctly due to vibration
or
shock in
l Re-record or replace
It
with
another
recordable disc
the
unit
Can’t WRITE
l Editing is impossible.
l Check the number of tracks.
DEFECT
l The disc is scratched.
l If the sound you hear is not right, try
recording again
(DEFECT)
l replace the disc with another
recordable
disc
Din UNLOCK
(UNLOCK)
l Poor connection of the digital cable.
l Connect the digital cable securely.
DISC FULL
l The disc
IS out of recording space.
l Replace it
with
another recordable disc.
POWER ?
PROTECTED
l Improper power is being supplied.
l The MD is write protected.
l You tried to record without loading an
MD.
l Use one of the specified power
sources.
l Move the write protection knob back to
its original position.
l Load a recordable MD.
l A playback-only MD was loaded and
the REC button was pressed when the
l Replace it with a recordable MD.
Power was
off.
READ ERROR l The disc is damaged.
l Reload the disc or replace
It.
l Replace it
with
another recorded
disc
l Since a track number
is
currently
being
located or written to, the
unit
cannot
l Wait for a while and try the operation
STEM ERR l You have come to the conclusion that
(E-SYS)
the unit is out of order.
l To have it repaired, go to the distributor
where you purchased the unit.
EMP OVER
l The temperature is too high.
l Turn off the power, and wait for a while.
;E-TEMP)
TOC ERROR
l A large portion of the disc has been
damaged.
l Replace it with another recorded disc.
(E-TOC)
ce
IV,
“u”‘““‘y
ation (track names,
e
ect.
k has been protected from
replace
it
with
another
recordable
disc
l
edit
the track with the device on
which
it
was
recorded
d
disc
Tr. Protect
l
The trac
being erased
.
TOC ERROR l A large portion of the disc has been
l Replace it with another recorde
damaged.
(E-UTOC)
l There is an
error
? DISC
l Adiscn
music was
(?DISC)
l There is an err
disc.
in the recorded
signal
w
erase
all
of the
signal
errors, and then
try recording again
which contains data other than
l A
disc
which
contains non-music data
played can
be played
o
r
the signal from the
l
Replace
it
with another recorded disc.
(
): Error messages seen on the remote control.
39