Filter
Top Products
n
Recording from CDs or MDs (Synchro recording)
0
Svnchro recording is a method that detects the playback sound from the source equip-
ment. When
sound
is present, it automatically
starts
recording. When the sour&is
silent, the recordina will be paused
1. connect the external equipment.
(See page 8.)
. Insert a recordable
MiniDisc.
0
3
Press the REC button.
0
To record from a tuner, first tune in a
broadcast.
0
To record from a CD, first start play-
ing the track you want to record.
4
While
playing sound from the external
equipment connected to this unit, move
the
H1
REC LEVEL
H
shuttle switch
to adjust the recording level.
5
6
0
Adjust the recording level so that the
maximum sound volume from the
source makes the reading swing
somewhere between -4
dB
and 0
dB.
0
To record from a CD, first adjust the
recording level. Then put the equip-
ment connected to this unit into the
playback stand-by mode.
Press the ENTER/SYNC button.
Begin playback on the source equip-
ment.
0
Recording will begin automatically.
To interrupt recording:
When the source equipment is stopped,
the unit will enter the synchro recording
stand-by mode. When playback is re-
sumed, a recording will be resumed.
If a silence lasts for 3 seconds or more,
the recording will be paused.
Pressing the
HI
button on this unit
(when in this mode) will cause the unit
to enter the recording stand-by mode
and cancel the synchro recording mode.
To stop recording:
Press the
U:OFF
button.
0
If the unit is left unattended after the
recording is complete, the power will
automatically shut off in approximately
2 minutes.
OdB
-4dB
10