Filter
Top Products
6
When a sound, such as a person speak-
ing, is picked up by the microphone, re-
cording will begin automatically.
0
If a silence lasts for 3 seconds or
more, the recording will be paused au-
tomatically. However, the unit will not
pause for about the first 10 seconds
after recording has started.
To interrupt a synchro recording:
Press the
,I1
button while recording.
0
The Mic synchro recording mode will be
canceled, and the unit will enter the re-
cording stand-by mode.
0
To resume synchro recording, press the
ENTER/SYNC button again.
To stop recording:
Press the
U:OFF
button.
W
Recording from the microphone
(Mic manual recording)
0
You can start recording manually (any-
time you like).
1
Put the unit in the recording stand-by
mode. (Perform steps 1
---
4 in the “Mic
synchro recording” section.)
2
Press the
,I!
button.
0
Recording will start.
To interrupt a recording:
Press the
,I1
button while recording.
0
The unit will enter the recording stand-
by mode.
0
To resume recording, press the
)!I
but-
ton again.
The track number will be increased by
one each time you interrupt a record-
ing.
To stop recording:
Press the
U:OFF
button.
Notes:
0
If you want to use a microphone, be sure it is a plug-in-power type microphone.
l When a plug-in-powertype microphone is plugged in, the main unit will provide power
for the microphone’s operation.
l If a different type of microphone is plugged in, it may not operate properly or it may
cause the unit to malfunction.
0
Insert the plug firmly. If you don’t, the recording will not be made properly.
0
Use a microphone with a 1/8”(3.5 mm) diameter stereo mini plug.
0
While making a mic recording, do not connect anything to the LINE IN jack on the main
unit.
14