Sharp MD X5 Clock Radio User Manual


 
32
HH
HH
H Sleep operation
The radio, compact disc and MiniDisc can all be turned off automatically.
1 Play the desired sound source.
2 Press the TIMER/DELETE button, and then press the or button so
that the SLEEP display and setting time appear.
3 Within 10 seconds, press the ENTER button.
I If you wish to use the displayed time, press the ENTER button.
To change the sleep timer:
4 Set the sleep time using the 1 or 0 button.
I The setting time is changed in 5-minute increments between 2 hours
and 5 minutes, or 1 minute increments between 5 minutes and 1 minute.
5 Press the ENTER button.
I The sleep operation will start.
I When it is one minute before the programmed sleep time, the volume
will be reduced gradually. During this period, you cannot change the
volume.
6 The unit will be turned off automatically after the preset sleep time has
elapsed.
Notes:
I Once the sleep time is set, it will remain the same until the setting is
changed.
I This sleep functions of this unit cannot be used to control equipment
connected to this unit. You must use the sleep functions of the other
equipment, if it has them.
To confirm the sleep timer setting:
1 Press the TIMER/DELETE button.
2 Press the or button so that the SLEEP display and setting time
appear.
To cancel the sleep operation:
If the power is turned off, the sleep operation will be canceled.
The timer operation can also be canceled as follows if the power cannot be
turned off during recording.
1 Press the TIMER/DELETE button.
2 Press the or button so that the SLEEP OFF display appears.
3 Within 10 seconds, press the ENTER button.
I The sleep operation will be canceled. ("SLEEP" will go off.)
HH
HH
H Simultaneous sleep and timer operation
1 Play the desired item (compact disc, MiniDisc, etc.).
2 Set the sleep timer.
3 Set timer playback.
I When the preset sleep time has elapsed, the power will be automatically
turned off. When the timer start time is reached, the power will be turned
on again.
2
4
3,5
2
Sleep timer indicator
2
4
5
ENTER
TIMER/DELETE
(Continued)
*22-34 98.6.23, 10:11 AM32