Filter
Top Products
5
Charging Your Musicam for Use
Built-in Battery
Your camera uses a built-in Lithium battery. When the Battery
On/Off switch is On.
the USB port serves as a charger for the battery. To charge the
battery, simply connect the device via the USB cable to your PC,
the camera screen will light up. In the charging period the screen
will continue to light up. Please note that you can not power off the
screen while the camera is connected to the USB port. Once
unplugged, the camera will power off automatically, simply press the
Power/Shutter button on the left side of the camera to start the
camera.
If the battery power is low, the LED light will flicker (MP3 mode) or
low battery will display on the screen (camera mode) and the
device will power off. Should this occur, download your photos to
your PC as soon as possible, and then charge the device. Charging
time is around 3-4 hours.
WARNING:
• Before starting to take photos, please test the device’s
functioning in order to avoid disappointing results. Should
the device fail to work, please contact us immediately.
• Static Electricity may affect your device by powering it
off. To restart, simply power on again.
• Shifting the Battery On/Off switch to Off will cause any
photos saved in the camera to be deleted from memory.
NOTE: If you do not intend to use your musicam for an extended