![](http://pdfasset.owneriq.net/f/6e/f6ef416e-f9f0-7004-699e-386f3558f843/f6ef416e-f9f0-7004-699e-386f3558f843-bg2e.png)
46
Synchronized Recording and Playback with Multiple AR Units (AR-LINK)
AR-200 Settings
Selecting the AR-200’s Operation (AR-
LINK SLAVE)
Set the AR-2000 so as to enable synchronization with AR-
LINK.
The AR-200 can only be set to AR-LINK slave.
Settings Procedure
1.
Turn off the power of the AR-200.
2.
Set the MODE switches on the AR-200’s bottom panel as
shown below.
SW4: ON
3.
Turn on the power of the AR-200.
The SLAVE indicator on the front panel lights up.
* Use a pointed object to change the ON/OFF settings of the
MODE switches.
* For more detailed information about synchronized operation
with AR-LINK, refer to the AR-3000 Owner’s Manual.
AR-200_e.book 46 ページ 2003年7月14日 月曜日 午後1時11分