Roland AR-200 MP3 Player User Manual


 
16
Cards Handled by the AR-200
Notes Regarding Formatting
Performing formatting erases all data on the card. Before you format the
card, make sure it contains no data you don’t want to lose.
*A maximum of 250 phrases may be created on cards formatted on the AR-200.
* The available recording time for a single card varies according to card capacity and
recording settings.
* For a rough guide to maximum recording times with various settings, see the
"Card Audio Recording Time Chart"
in the reference materials (p. 53).
Procedure for Formatting Cards
1
Confirm that there is no card inserted in the card slot.
2
Hold down the STOP button for at least 5 seconds
A flashing “Fot” appears.
fig.card-01
3
Insert the card that you wish to format into card slot.
4
Press the PLAY button, formatting will begin.
5
If you wish to stop the process, press the STOP button.
When formatting is completed, the message is changed in the display.
fig.card-02
Important Notes on Handling Cards
When Inserting
Insert the card all the way into the card slot.
When Removing
To remove the card, press the eject button.
Never remove a card during recording, playback, or formatting.
Furthermore, do not turn off the power or remove the AC adaptor cord
during recording, playback, or formatting. Doing so may damage the card.
Depending on the length of
stored phrases, it may not
b
e possible to create the set
maximum number of
phrases.
Never remove a card while
formatting is in progress.
AR-200_e.book 16 ページ 2003年7月14日 月曜日 午後1時11分