Roberts Radio CRD-33 Clock Radio User Manual


 
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
System reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. Switch on your radio.
2. Press and hold in the Info button until "Station order" appears on the
display.
3. Press the Tuning Up/Down button until the display shows "Factory
reset".
4. Press in and release the Select button, the display will show "Press
SELECT to confi rm reset . . .".
5. Press the Select button to confi rm. A full reset will be performed and
all presets and station lists will be erased. A quick scan of UK DAB
band III frequencies will be carried out. The clock will be set when the
radio recieves time information from the DAB radio station.
In case of malfunction due to electrostatic discharge, reset the product
(reconnection of power source may be required) to resume normal
operation.
If a problem persists our technical staff would be pleased to offer any
assistance on operating the radio. Our technical helpline number is
020 8758 0338.
38
1
3
3
4,5