Filter
Top Products
The Initial Settings Menu08
62
En
CD Playback
• Default setting: PCM Playback
Digital Audio Out
Video Output
Language
Display
Options
Speakers
Parental Lock
Bonus Group
Auto Disc Menu
Group Playback
DVD Playback Mode
CD Playback
PCM Playback
DTS CD Playback
Initial Settings
(DV-656A screen)
When set to PCM Playback, playback is
optimized for standard audio CDs. You can
also play DTS CDs, however you may notice
some noise when a DTS CD starts playing.
This is not a malfunction.
When set to DTS CD Playback, playback is
optimized for DTS CDs. In this mode you
cannot play standard audio CDs through the
analog outputs. Change the setting back to
PCM Playback to play standard CDs.
Speakers
Audio Output Mode
• Set in Setup Navigator (Default: 2
Channel)
Digital Audio Out
Video Output
Language
Display
Options
Speakers
Audio Output Mode
Speaker Installation
Channel Level
2 Channel
5.1 Channel
Initial Settings
If you connected this player to your amplifier
using the 5.1 channel analog outputs (front,
surround, center and subwoofer outs), set
this to 5.1 Channel; if you connected only
the stereo outs, set to 2 Channel.
• Even if you set Audio Output Mode to
5.1 Channel, you’ll only get sound
from all speakers when playing a multi-
channel DVD-Audio disc, or Dolby
Digital or DTS encoded DVD disc.
• When set to 5.1 Channel, only the front
left/right channels are output from the
AUDIO OUT (2ch) jacks. Change to
2 Channel if you want to listen to
downmixed stereo audio (for example,
because you are listening through the
TV’s built-in speakers).
• When set to 5.1 Channel there is no
digital output when playing DVD-Audio.
• If you set to 2 Channel, Dolby Digital,
DTS and MPEG audio is mixed down to
two channels so you still hear all the
audio recorded on the disc.
• Some DVD-Audio discs don’t allow
down-mixing of audio. These discs
always output multi-channel audio
regardless of the setting made here.
Speaker Installation
• Set in Setup Navigator (default: L/R:
Large | C: Large | LS/RS: Large| SW:
On )
You only need to make this setting if you
connected this player to your amplifier using
the 5.1 channel analog outputs.
This setting does not affect digital audio
output.
Digital Audio Out
Video Output
Language
Display
Options
Speakers
Audio Output Mode ‰ 5.1 Channel
Speaker Installation
Channel Level ‰ Fix
Initial Settings