Filter
Top Products
The Audio Settings Menu
06
46
En
• Audio DRC is only effective with Dolby
Digital audio sources.
• Audio DRC is only effective through the
digital output when Digital Out is set to
On, and Dolby Digital Out is set to
Dolby Digital > PCM. See page 51.
• The effect of Audio DRC depends on
your speakers and AV receiver settings.
Audio DRC
• Default setting: Off
When watching Dolby Digital DVDs at low
volume, it’s easy to lose the quieter sounds
completely—including some of the dialog.
Switching Audio DRC (Dynamic Range
Control) to On can help by bringing up the
quieter sounds, while controlling loud peaks.
How much of a difference you hear depends
on the material you’re listening to. If the
material doesn’t have wide variations in
volume, you may not notice much change.
1 Press SETUP and select ‘Audio Set-
tings’ from the on-screen display.
Video Adjust
Audio Settings
Play Mode
Setup Navigator
Disc Navigator
Initial Settings
2 Highlight Audio DRC, then use the
/
buttons (cursor left/right) to change
to ‘On’ or ‘Off’, as required.
Audio Settings 1/ 1
Audio DRC
Virtual Surround
Channel Level
Off
Off
Fix
3 Press ENTER to make the setting and
exit the Audio Settings screen.