Filter
Top Products
4
12
5
6
3
1 High-range speaker left
2 High-range speaker right
3 Middle-range speaker right
4 Middle-range speaker left
5 Low-range speaker left
6 Low-range speaker right
High-range speaker leftHigh-range speaker
rightMiddle-range speaker rightMiddle-
range speaker leftLow-range speaker left
Low-range speaker right
12
4
35
1 Front speaker left
2 Front speaker right
3 Rear speaker right
4 Rear speaker left
5 Subwoofer
Front speaker leftFront speaker rightRear
speaker rightRear speaker left Subwoofer
# You cannot select subwoofer when the sub-
woofer output is off.
# You cannot adjust the time alignment when
neither Front Left nor Front Right is selected in
the position selector mode.
5 Press a or b to adjust the distance be-
tween the selected speaker and the listen-
ing position.
Each press of a or b increases or decreases
the distance.
400.0cm 0.0cm is displayed as the distance
is increased or decreased, if you have selected
centimeters (cm).
160inch 0inch is displayed as the distance
is increased or decreased, if you have selected
inches (inch).
# You can adjust the distance for the other
speakers in the same way.
6 Press BAND to cancel the time align-
ment mode.
About the network
function
The network function lets you divide the audio
signal into different frequency bands, and
then reproduce each of them through sepa-
rate speaker units.
You can then make precise adjustments to the
reproduced frequency band (with a low-pass
filter or high-pass filter), level, phase and other
parameters to match the characteristics of
each speaker unit.
Audio Adjustments
En
43
English
Section
08