Filter
Top Products
6
Installation
Searching for and storing TV channels is done channel by channel.
You must go through every step of the Manual Installation menu.
Selection Mode is only present and lights up if the country selected also
offers the channel option (C-channels for aerial channels, S-channels for cable
channels).
You can choose either channel or frequency mode.
& Select the TV system
Select the country or part of the world from where you want to receive the
TV channel.
If you are connected to a cable system, select your country or part of the
world where you are now located.
é Search for a TV channel
The frequency or the channel number increases until a TV channel is found.
In case of poor reception, you can improve the reception by adjusting the
frequency with the
- P + keys.
Direct selection of a TV channel
If you know the frequency, the C- or S-channel number, enter the 3 digits of
the frequency directly with the digit keys 0 to 9 (e.g. 048).
“ Enter the programme number.
‘ To store your TV channel, select Store and press the OK key.
Repeat steps & to ‘ to store another TV channel.
( To exit from the menu press one of the colour menu keys on the remote
control.
& In the Automatic installation menu select On with the cursor left/right and
press the
OK key to activate the searching. All TV channels are searched for
and stored automatically.
Wait until the message
Ready is displayed at the bottom of the screen.
If a cable system or a TV channel which broadcasts ACI (Automatic Channel
Installation) or a TV channel transmitting a teletext page with the frequencies
and programme names of all the TV channels which can be received, is
detected, the search is stopped and the programme list appears.
The programme list is automatically filled with all the programme numbers
and names of the TV channels transmitted.
It is possible that the cable company or the TV channel displays a broadcast
selection menu. Layout and items are defined by the cable company or the TV channel.
Make your choice with the cursor and press the
OK key.
é Press one of the colour menu keys on the door of the remote control to
return to the
INSTALLATION menu.
Automatic Installation
Searching O%.....................100%
AUTOMATIC
INSTALLATION
MANUAL
INSTALLATION
05 10
16 11
27 12
38 13
4 9 ...
(Selection Mode)
System
Search
Programme No
Store
AUTOMATIC
INSTALLATION
0 10 ...
1 BBC1 11 ...
2 BBC2 12 ...
3 ITV 13 ...
4 ... .. ...
. ... .. ...
. ... .. ...
. ... .. ...
Automatic Installation Off
After the new or extra TV channel has been stored, the TV automatically transfers the TV channel(s) to the video recorder provided with the
EasyLink function.The message:
EasyLink : Downloading Presets ... appears at the bottom of the screen.
The programme list of the video recorder is now equal to the one of the TV.
Manual installation
Automatic installation