Filter
Top Products
20
Connect Peripheral equipment
There is a wide range of audio and video equipment that can be connected
to your receiver.The following connection diagrams show you how to
connect them to the back or the front side of the receiver.
Note: in case of the monitor in a stand alone situation without the receiver box
connected, see the instructions with the monitor.
Note: Do not place your video recorder too close to the screen as some video
recorders may be susceptible for signals out of the display. Keep a minimum distance
of 0.5 m to the screen.
Connect the supplied aerial cables 1, 2 and, to obtain a better picture
quality, a eurocable
3 as shown opposite.
If your video recorder is provided with the EasyLink function, the eurocable supplied
with it, should be connected to
EXTERNAL 2 to benefit of the EasyLink function.
Only if you do not connect the eurocable 3, you have to do the following :
Search for and store the test signal of the video recorder
& Unplug the aerial cable 1 from the aerial socket x of your video recorder.
é Switch on your TV and put the video recorder on the test signal.
(See the handbook for your video recorder.)
“ Search for the test signal of your video recorder in the same way as you
searched for and stored the TV signals. See Installation, Searching for and
storing TV channels, Manual Installation, p. 6.
‘ Store the test signal under programme number 0 or between 90 and 99.
( Replace the aerial cable in the aerial socket x of your video recorder after
you have stored the test signal.
Decoder and video recorder
Connect a eurocable 4 to your decoder and to the special euroconnector
of your video recorder. See also the video recorder handbook.
See Define Decoder/Descrambler prog. numbers, p. 8.
You can also connect your decoder directly to
EXTERNAL 1 or 2 with a
eurocable.
& Connect the aerial cables 1, 2 and 3 as shown opposite. Better picture
quality can be obtained if you also connect eurocable
5 to EXTERNAL 2
and a eurocable 4 to EXTERNAL 1 or 3.
é Look for the test signal of your peripheral in the same way as you do for a
video recorder.
When a video recorder is connected to EXTERNAL 1 you can only record a
programme from your TV.
Only when a video recorder is connected to
EXTERNAL 2 it is possible to record a
programme from your TV as well as from other connected equipment. See Record
with your video recorder, p. 26.
Note:
EXTERNAL 1 can handle CVBS and RGB, EXTERNAL 2 CVBS,Y/C and RGB,
EXTERNAL 3 only CVBS.
VCR 1 DECODER
CABLE
1
EXTERNAL
4
2
3
2
EXTERNAL
21
VCR 1
CABLE
1
5
2
4
3
Video recorder and other peripherals
Video recorder
Connect Peripheral Equipment