Philips FTR9952 MP3 Player User Manual


 
22
Connect your computer
15-pin D sub
(2-row)
15-pin mini D sub
(3-row)
a
MAINS INLET
VGA IN
AUDIO IN
L
R
VGA OUT
5
1 32 42
AUDIO OUT
& Connect one end of a VGA cable supplied to the video card of the computer
and the other end to the
VGA MONITOR IN connector at the rear side of
the receiver box or at the
VGA IN connector 1 at the back of the monitor
in case you have no receiver box connected to the monitor.
See the instructions with the monitor.
é Fix the connectors firmly with the screws on the plug.
In case of a Multimedia computer, connect audio cables to the audio outputs
of your Multimedia computer and to the
AUDIO MONITOR IN R (right) and
L (left) above the VGA MONITOR IN connector at the back of the receiver
or to the
AUDIO IN L and R 2 at the back of the monitor.
Connect your Apple Macintosh* computer
Attention: Macintosh computers with separate H and V synchronisation signals
can be used together with a switchable adaptor. Macintosh computers with
Composite Sync and Sync on Green signals may need another special adaptor or
cable. Contact your dealer.
& Connect the switchable adaptor for Apple video connectors to one end of a
VGA cable.
é Put the DIP switches on the adaptor in the following positions :
1234
off off on on
Connect the end of the VGA cable with the adaptor to the video card of the
computer and the other end to the
VGA MONITOR IN connector on the
back of the receiver box or at the
VGA IN connector on the back of the
monitor in case you have no receiver box connected.
Screw the connectors down firmly.
To reproduce computer screen information and/or programmes, see p. 25.
* Apple Macintosh is a registered trademark of Apple Computer,Inc.
Connect your computer