Philips MCD122 Clock Radio User Manual


 
19
 [All] – If the connected device supports
multi-channel audio formats, select this
option.
[Night Mode]
Make loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
 [On]
only).
 [Off] – enjoy surround sound with its full
dynamic range.
Video setup
On the [Video Setup] page, you can set the
following options:
[TV System]
Change this setting if the video does not appear
correctly. By default, this setting matches the
most common setting for TVs in your country.
 [NTSC] - For TV with NTSC color system.
 [PAL] - For TV with PAL color system.
 [Multi] - For TV that is compatible with
both PAL and NTSC.
[TV Display]
The TV format determines the aspect ratio of
display according to the type of TV you have
connected.
 [4:3 Pan Scan] – For 4:3 screen TV: full-
height display with the trimmed sides.
 [4:3 Letter Box] – For 4:3 screen TV:
wide-screen display with black bars on the
top and bottom of the screen.
 [Wide Screen] – For wide-screen TV:
display ratio 16:9.
4:3 Letter Box (LB)
4:3 Pan Scan (PS)
16:9 (Wide Screen)
6 Adjust settings
1 Press SYSTEM MENU.
2 Select a setup page.
3 Select an option and then press .
4 Select a setting and then press OK.
 To return to the previous menu, press
.
 To exit the menu, press SYSTEM
MENU.
General setup
On the [General Setup] page, you can set the
following options:
[OSD language]
Select the preferred language for on-screen
display.
[DivX® VOD Code]
Display the DivX® registration code.
Tip
Enter this DivX registration code when you rent or
purchase video from http://vod.divx.com/. The DivX
videos rented or purchased through the DivX® VOD
(Video On Demand) service can be played only on the
device to which it is registered.
Audio setup
On the [Audio Setup] page, you can set the
following options:
[Digital Output]
Select audio formats supported by the
connected device.
 [Off] – Turn off the digital output.
 [PCM] – If the connected device cannot
decode multichannel audio, select this
option.
English
EN