26
Listening to tracks recorded on the HDD
Switching the display information
Each press of the COUNTER button on the remote controller switches the information displayed in the display area. While the text
information is displayed using the DISPLAY button, the information below will not be displayed.
Using the remote controller
Plays a track by directly entering
the track number.
Playing time for the first track in the current group
The total track number and the total playing time for the current group The remaining time for the currently played track
Changes the brightness of the display area*.
Switches the displayed information in the display area.
Switches to the clock display.
Plays tracks in random order.
Plays tracks repeatedly.
(see page 30)
During stopped
During paused or playing
The elapsed time for the currently played track
Selects the track
you want to listen to.
While playing or paused, press the button once
to locate the beginning of the current track. Press
this button twice to locate the beginning of the
previous track and additional press of the button
locates the beginning of another previous track.
While playing or paused, press the
button to
locate the beginning of the next track. Then, each
press of this button locates the beginning of
another next track.
Selects a group.
Pressing the button selects the digit you are
entering.
The
button enters 10 or 0.
Example:
Track Number The button to be pressed
8
10
34 , ,
Scrolls the whole disc title longer
than the display area.
Activates the HDD section.
Starts playing or pauses.
Press the
/
button to start playing a
track. While playing, press the
/
button to pause.
Stops playback.
When the disc title is longer than the display area
Press the SCROLL button on the remote controller to display the
whole title sequentially.
* Changing the brightness of the display area
Each press of the DIMMER button changes the
brightness of the display area in the following order
from the above:
The display area is slightly dimmed. → The display
area is dimmed. → The display area is dimmed and
indicators other than the ON indicator on the front
panel are turned off. → The display area is turned on
and all indicators light.