Filter
Top Products
45
3
EN
Playback
Playback
1 While the recorder is during
recording mode or playback
mode, press the F2 (INDEX)
button.
• A number appears on the display and
an index mark or temp mark will be
placed.
Setting an index mark or a temp
mark
If index marks and temp marks are placed,
you can quickly find a location you want to
listen to in fast forward and fast rewind and
when cuing a file. Index marks can only be
placed on files created by Olympus voice
recorders, but temp marks can be placed
instead to temporarily remember desired
locations.
Clearing an index mark or a temp mark
1 Select a file in which index or
temp marks you wish to erase are
contained.
2 Press the 9 or 0 button to
select the index or temp mark to
erase.
3 While the index or temp number
is displayed for approximately 2
seconds on the display, press the
ERASE button.
• The index or temp mark is erased.
• Index or temp numbers after the
erased index or temp number will be
automatically decreased by 1.
Notes
• Temp marks are temporary markings, so
if you transmit a file to the PC or move
it with a PC, they will be automatically
erased.
• Up to 16 index and temp marks can be
set in a file. If you try to place more than
16 index or temp marks, [Index Full]
message will appear for index marks, and
[Temp Mark Full] for temp marks.
• Index or temp marks cannot be set or
erased in a locked file (☞ P.53).
• Even after an index or temp mark is
placed, recording or playback will
continue so you can place index or
temp marks in other locations in a
similar manner.
F2 (INDEX) button
ERASE button
90 button