Filter
Top Products
2
32
EN
Recording
Recording
• When remaining recording time is less
than 60 seconds, the LED indicator light
starts flashing. When the recording time
is decreasing to 30 or 10 seconds, the
light flashes faster.
• [Folder Full] will appear when the
recording cannot be made any further.
Select other folder or delete any
unnecessary files before recording
(☞ P.48).
• [Memory Full] will appear when the
memory is full. Delete any unnecessary
files before recording any further
(☞ P.48).
• When a microSD card is inserted in the
recorder, be sure to confirm the recording
media as either [Built-in Memory]
or [microSD Card] so that there is no
mistake (☞ P.64).
• If the REC (s) button is pressed when a
function other than the record function
is specified, [Cannot record in this
folder] is displayed. Select a folder from
[Folder A] through [Folder E] and start
recording again.
• We recommend formatting the record
media in the recorder before recording
(☞ P.77).
It is possible to record
exceeding 2GB:
The recording will continue even if the
volume of a single file exceeds 2 GB in
the linear PCM format recording.
• The file is saved every 2 GB in
separate files. It will be treated as
multiple files when playing back.
• When the recording exceeds 2 GB,
the number of files in the folder may
exceed 200 files. The 201st file and
later will not be recognized by the
recorder, so check by connecting the
recorder to a PC.