Filter
Top Products
iMuve
9 10
3. Basic Operations
3.1 Battery
: The battery is full.
: The battery is exhausted. Screen would prompt “Low power, please recharge” about
5 seconds and power off automatically when the battery is extremely low.
P200 powered by lithium battery. Please connect P200 to adapter for charging, or
connect car adapter with cigar-lighter adapter of car to charge for the battery. When
the battery is charging, the LED is red, and green represents finished charge.
1) Windows 98/98SE: Unplug P200 from USB port of the computer after stop
transferring.
2) Windows Me/2000/XP/Server 2003 (Windows 2000 e.g.): Click the icon at the
taskbar, then click the “Stop USB Mass Storage Device - Driver”, and click “OK”
button in the pop-up window “The ‘USB Mass Storage Device’ device can now be
safely removed from the system”, then you can unplug P200 from the computer
safely.
Please connect the car adapter to cigar-lighter adapter of car, please refer to the
figure. Netac Technology Co., Ltd. is not responsible for any loss arising out of using
this cigar-lighter adapter of car.
3) Mac OS 9.0 or above (Mac OS 10.3.2 e.g.): Select the icon(s) representing P200,
and click “File” to select “Exit NO NAME” or “Exit” (if SD/MMC card is plugged into
P200), then you can disconnect P200 from the computer.
Tips: Please drag P200 icon into Trash, then unplug it on Mac OS 9.0.
4) Linux 2.4.x or above: Input the command “umount /mnt” before unplugging P200.
The “/mnt” directory is corresponding with the “/mnt” mentioned above.
Cigar-lighter adapter of car