Filter
Top Products
iMuve
3.5 HOLD
This function is used to prevent the buttons from being operated accidentally. To lock all
buttons please simply lock HOLD switch, a lock icon would appear on the screen, and no
button would be able to operate. To release the lock status, please unlock HOLD switch.
If try to power on while HOLD switch is locked, P200 would power off automatically shortly
after displaying “Keys locked, please set the HOLD switch to unlock”, please unlock HOLD
switch, then try again.
3.7 Firmware Upgrade
1) You can download the latest firmware file from the website
http://www.netac.com.
2) Copy the firmware file which download from the website into directory
“\FWUpgrade” of P200, and disconnect P200 from the computer safely.
3) P200 would upgrade firmware automatically when synchronously hold BACK
and POWER button while power on. Please do not any operate P200 during
upgrading.
4) P200 would delete firmware file in directory “\FWUpgrade” and power off
automatically when upgrade has been finished. P200 would be run new
firmware program when P200 powered on again.
13 14
3.6 Reset
In case P200 doesn’t response to any operation, poke the RESET hole where back of
P200 to reboot system. You need to restart P200 after rebooting, the settings of P200
would return to the last effective settings before rebooting.
Push