Filter
Top Products
44
Create a waypoint: First, find the location on the Master Map. The
longer arrow shows the location of a public hunting area parking lot.
Move the pointer arrow tip over the location (left) and click to create
the waypoint. The waypoint appears (right) with the default waypoint
symbol and name, both of which can be changed. These figures were
taken from a zoom range of 4.05 miles. It looks as if the waypoint is on
the road, but zooming in closer would show the waypoint is actually
south of the road, just where the pointer tip placed it.
5. Relocate your mouse pointer and click to create additional waypoints
as needed.
6. To close the Create Waypoints command, press
Esc
(the Escape key)
or click the
C
ENTER
M
ASTER
M
AP
button.
Tips:
• If you need to erase or delete a waypoint, move the cross-hair
pointer over a waypoint and right-click. In the pop-up menu, click
D
ELETE
W
AYPOINT
.
• There are other ways to delete waypoints, and you can also change
the symbol, name and location. For instructions on these functions,
along with other tips, see Create Waypoint, Delete Waypoint, Insert