Filter
Top Products
7
4. Press the SET button to confirm, and advance to set the minutes.
5. The minute digit will flash in LCD 1. Press the + button to
advance the minutes (holding the + button down will advance the
minutes in increments of five).
6. Press the SET button to confirm, and to advance to the Time Zone
setting.
V. TIME ZONE SETTING
This is a feature available on the WS-7058U, it is designed for use in
Germany. You may ignore this feature.
1. Press the SET button five times to enter this setting mode.
2. “ 0” will flash in LCD 1.
3. Press the SET button again to advance to set the date.
VI. DATE SETTING
1. Press the SET button six times to enter the Date Setting mode.
2. The default year “98” will flash in LCD 1.
3. Press the + button to change the year.
Note:
The date is displayed in the Day/Month/Year format.
4. Press the SET button to confirm the year, and to advance to set the
month. The default month digit “1” will flash in LCD 1.
5. Press the + button to change the month.
6. Press the SET button to confirm, and to advance to set the date.
The default date digit “1” will flash in LCD 1.
7. Press the + button to change the date.
8. Press the SET button to confirm, and to advance set the Date
Display.
VII. SELECTING °F OR °C AND INCHES OR MILLIMETERS
1. Press the SET button nine times to enter the °F/°C setting mode.
2. The default “°C” will flash in LCD 1.
3. Press the + button to toggle between “F” and “°C.”
Note:
When
°
F is selected, the rainfall measurement will change to
inches. When
°
C is selected, the rainfall measurement will change
to millimeters. When the selection is made the effects are seen
immediately in temperature and rainfall measurement readings
found in other LCD screens.