Filter
Top Products
3
INVENTORY OF CONTENTS
1. WS-7058U—Wireless Weather Center,
with table stand (Figure 1).
2. TX4U—Remote Thermo-Hygro
(temperature-
humidity) Sensor:
includes a
mounting
bracket/receptor,
rain cover, two
mounting screws, and adhesive tape
(Figure 2).
3. TX5U—Rainfall Sensor: includes a base,
rainfall collector, and two mounting screws
(Figure 3).
4. Instruction manual and warranty card.
ADDITIONAL EQUIPMENT (not included)
1. Seven fresh 1.5V AA batteries.
2. Philips screwdriver.
3. Flathead screwdriver.
4. Four wall-mounting screws.
QUICK SET-UP GUIDE
1. Insert two AA batteries into the Remote Thermo-Hygro Sensor.
2. Insert two AA batteries into the Rainfall Sensor.
3. Insert three AA batteries into the Weather Center.
4. Wait 12 minutes, or until the Weather Center has received signals
from the Remote Thermo-Hygro, and Rainfall Sensors.
5. Set time and date.
6. Mount the units, ensuring they are sending and receiving signals.
Figure 3
Figure 2
Figure 1