Filter
Top Products
P a g e | 17
6. Press the ALARM button once. The low outdoor temperature alarm display will be
shown.
7. Press and hold the SET button for about 2 seconds. The temperature digit will flash.
8. Press the ▲/DATE button or ▼/RAIN button to set the low
indoor temp alarm value. Hold the arrow button in to change the
value faster.
9. Press the ALARM button to confirm the setting. The digit will
flash.
10. Press the SET button to switch the alarm on or off. The ((()))
icon indicates the alarm is switched on.
11. Press the ALARM button to move to the indoor humidity
alarms.
INDOOR HUMIDITY ALARMS:
1. The high indoor humidity alarm display will be shown.
2. Press and hold the SET button for about 2 seconds. The
humidity digit will flash.
3. Press the ▲/DATE button or ▼/RAIN button to set the high
indoor humidity alarm value.
4. Press the ALARM button to confirm the setting. The digit will
stop flashing.
5. Press the SET button to switch the alarm on or off. The ((())) icon indicates the alarm is
switched on.
6. Press the ALARM button once. The low indoor humidity alarm
display will be shown.
7. Press and hold the SET button for about 2 seconds. The
humidity digit will flash.
8. Press the ▲/DATE button or ▼/RAIN button to set the low
indoor humidity alarm value.
9. Press the ALARM button to confirm the setting. The digit will
stop flashing.
10. Press the SET button to switch the alarm on or off. The ((())) icon indicates the alarm is
switched on.
11. Press the ALARM button to move to the outdoor temperature alarms.
OUTDOOR TEMPERATURE ALARMS:
1. The high outdoor temperature alarm display will be shown.
2. Press and hold the SET button for about 2 seconds. The
temperature digit will flash.
3. Press the ▲/DATE button or ▼/RAIN button to set the high
outdoor temp alarm value. Hold the button in to change the
value faster.
4. Press the ALARM button to confirm the setting. The digit will stop
flashing.
5. Press the SET button to switch the alarm on or off. The ((())) icon
indicates that the alarm is switched on.
6. Press the ALARM button once. The low outdoor temperature
alarm display will be shown.
7. Press and hold the SET button for about 2 seconds. The
temperature digit will flash.