Filter
Top Products
P a g e | 12
4. Press the SET button to confirm the month and enter the date setting mode. The date
digit will flash.
5. Press the ▲/DATE button or ▼/RAIN button to set the date.
6. Press the SET button to confirm and to enter the °F/°C TEMPERATURE UNIT.
°F/°C TEMPERATURE UNIT:
The temperature can be displayed in °F or °C. (Default °F)
1. The temperature unit will flash.
2. Press the ▲/DATE button or ▼/RAIN button to toggle between
“°F” or “°C”.
3. Press the SET button to confirm and to enter the WIND
SPEED UNIT.
WIND SPEED UNIT:
The wind speed unit can be set to read in mph (miles per hour), km/h
(kilometers per hour), bft (Beaufort), knots, or m/s (meters per second).
The default unit is mph.
1. Press the ▲/DATE button or ▼/RAIN button to toggle between
the unit “mph”, “km/h”, "bft", "knots" or “m/s”
2. Press the SET button to confirm and to enter the RAINFALL
UNIT.
RAINFALL UNIT:
The rainfall unit can be set to read in inch or mm. The default unit is inch.
1. Press the ▲/DATE button or ▼/RAIN button to toggle between
the unit “inch” or “mm”
2. Press the SET button to confirm and to enter the RELATIVE AIR
PRESSURE UNIT.
RELATIVE AIR PRESSURE UNIT:
The relative air pressure can be set to read in inHg (inches of mercury) or hPa (hectopascal).
The default unit is inHg.
1. Press the ▲/DATE button or ▼/RAIN button to toggle between
the unit “inHg" or “hPa”
2. Press the SET button to confirm and to enter the RELATIVE
PRESSURE REFERENCE VALUE SET.