La Crosse Technology WS-2814U-IT Portable Speaker User Manual


 
P a g e | 15
4. After waiting for 10 minutes, insert the batteries into the thermo-hygro sensor, and rain
sensor making sure to align the "+" symbol on the batteries with the markings on the
battery cover and inside the battery compartment.
5. Within 2 minutes of inserting the batteries into the sensors, insert the batteries into the
display, making sure to align the "+" symbol on the batteries with the markings inside the
battery compartment.
6. Wait 5 minutes for the outdoor weather data to display. If any of the outdoor data
displays "--" after waiting for 5 minutes, follow the "Set Up Instructions” near the
beginning of this manual or in the Quick Set Up Manual included with the product.
TO EXIT THE MANUAL SETTING MODE:
To exit the manual setting at any time, either:
Press the MIN/MAX button or the ALARM button to exit SET mode, or
Simply wait 30 seconds until the SET mode times out and returns to the Mode 1 display.
WEATHER ALARM OPERATIONS FOR THE WEATHER STATION DISPLAY
The Weather alarms can be set when certain weather conditions are met. For example, you can
set the thresholds for the outdoor temperature to +104°F (high) and 14°F (low), while enabling
the high alarm and disabling the low alarm (i.e. temperatures <14°F won’t trigger alarm, but
temperatures >+104°F will).
When the value meets the condition for high alarm or low alarm, the alarm will ring for 2
minutes and the value will blink, along with the corresponding icon ("HI AL"/ "LO AL").
Press any button to stop a ringing alarm.
The high and low alarms can be switched On/Off independently, according to the needs.
If at any time during the alarm setting process you would like to exit alarm setting mode,
press the MIN/MAX button or wait for about 30 seconds and the display will return to normal
display mode automatically.
Press the ALARM button to enter ALARM mode. Subsequent presses of the ALARM button
will advance to the next weather alarm section.
Note: Weather alarms can also be set from the Heavy Weather Pro software. Consult the
Heavy Weather Pro Software User’s Guide for instructions.
Note: Remote Monitoring and Alerts Activation Card has instructions for downloading the La
Crosse Alerts software and the needed activation key to enable this feature.
THE FOLLOWING WEATHER ALARMS CAN BE SET IN ALARM MODE:
High and Low pressure alarms
High and Low indoor temperature alarms
High and Low indoor humidity alarms
High and Low outdoor temperature alarms
High and Low outdoor humidity alarms
High wind gust alarm
Wind direction alarm
Rainfall amount in 24 hour period alarm