Filter
Top Products
15
Getting Started
Connections
Function Setup
Advanced Playback
Others
Basic Playback
DVD
VCD
CD
1
23
56
7
8
9
+10 0
4
MENU
ENTER
TOP MENU
PAUSE
STOP
PLAY
OPEN/CLOSE
POWER
DISC +/—
/ / /
REMOTE CONTROLLER
RC
-426DV
FIRST SETUP
TV Shape
4:3LB
Thank you for your purchase of
our DVD-Video Player.
Please make a selection for
On-Screen Language and your TV shape
and press ENTER button on your remote control.
On-Screen Language
ENG
PLAY
Press the PLAY button.
The DVD Changer starts playback.
If you have inserted a DVD video with a title menu or
a Video CD with PBC (Playback Control) functional-
ity, a menu screen may appear. See “Direct Play-
back via the On-Screen Menu” on page 16.
To start playback of a PBC-equipped VIDEO CD
from the menu screen, set “PBC” to “ON” via the on-
screen menu function. See page 38.
To obtain a higher picture quality
Occasionally, some picture distortion not usually visible during a
normal telecast may appear on the TV screen during playback
of a DVD video. This is due to the fact that DVD videos provide a
higher resolution and therefore also more data to process. While
the amount of noise depends on the TV you connect the DVD
Changer to, reducing the sharpness setting on your TV when
viewing DVD videos may alleviate the problem.
About the
DVD
VCD
CD
symbols
The
DVD
VCD
CD
icons on the heading bars below show the discs
that support the function described in the section in question.
DVD
: This function is available for playback of DVD videos.
VCD
: This function is available for playback of VIDEO CDs.
CD
: This function is available for playback of audio CDs.
Notes:
• For PBC (Playback Control) of VIDEO CDs,
see “About VIDEO CDs” on page 9.
• Depending on the DVD video you are
using, you may need to press the TOP
MENU or MENU button to display the
menu screen.
■ Inserting other discs
1. Press the OPEN/CLOSE button to open the disc drawer.
2. Press the DISC SKIP button on the main unit repeatedly
until the disc you wish to replace can be accessed.
3.
Remove the disc you wish to replace, and insert another disc.
4.
Press the OPEN/CLOSE button again to close the disc drawer.
Note:
You can also press the PLAY button to automatically close
the drawer and start playback of the disc that is currently up
front. To start playback of another disc than the one in the front
tray, you first need to close the disc drawer.
■ Selecting the desired disc for playback
Press one of the DISC 1–6 buttons on the main unit or on the
remote controller. The DPC-6.1 starts playing the first title of the
selected disc. There is no need to press the
PLAY button.
Notes:
• If you select the desired disc using one of
the DISC 1–6 buttons while the DVD Changer
is playing back a title of another disc, playback starts with
the first title of the newly selected disc.
• You can also press the DISC SKIP button on the unit or DISC
+/– button to jump to the disc in the next tray (or from tray #6
to tray #1 if the disc in tray #6 is currently being played back).
In that case playback will start with the first title of the disc in
the newly selected tray.
• If you select the desired disc by pressing the DISC SKIP button
while the DVD Changer is stopped, press the PLAY button
to start playback of the first title of the selected disc.
■ The FIRST SETUP screen
The FIRST SETUP screen is only displayed the very first time
you switch on your DPC-6.1. This page allows you to set
the two single most important parameters. Note that you
can change these settings any time by selecting the ap-
propriate on-screen menu function. See also page 34, 35.
1. Check the video connection of the DVD Changer to
your TV set (see page 10 and following) and switch on
your TV.
2. Switch on the DVD Changer .
The following menu screen
page is displayed:
3. Press the remote controller’s
or button to select “On-
Screen Language” and pr ess
the ENTER button.
You can select one of the
following languages: ENG
(English), FRE (French), or
SPA (Spanish). That
language will be used on
all on-scr een menu pages
and for subtitling. See page
35.
4. Select the desired language using the
or button
and confirm by pressing ENTER.
Note:
If you agree with the currently selected language, just press
ENTER without changing the setting.
5. Press the button to select the “TV Shape” function
and confirm by pressing ENTER.
This function allows you to specify the picture size of
your TV. See 35 for details.
6. Use the
and buttons to specify the screen size and
confirm by pressing ENTER.
7. Press the SETUP button to store your settings.
The settings are stored and you are returned to the FIRST
SETUP screen page. As stated above, you can also
change these settings at a later stage. See page 32.
Disc 1 Disc 2 Disc 3 Disc 4 Disc 5 Disc 6
DISC
1
DISC
2
DISC
3
DISC
4
DISC
5
DISC
6
<main unit> <remote controller>
ENTER
To select the items
on the screen.
<remote controller>
After selecting an
item, confirm your
choice by pressing
ENTER.
5
or
Play