Filter
Top Products
13
Getting Started
Connections
Function Setup
Advanced Playback
Others
Basic Playback
COMPONENT
Y
P
B
P
R
VIDEO
S VIDEO
VIDEO OUTPUT
R
L
OPTICAL
COAXIAL
DIGITAL
OUTPUT
ANALOG
OUTPUT
COMPONENT
Y
P
B
P
R
VIDEO
S VIDEO
VIDEO OUTPUT
R
L
OPTICAL
COAXIAL
DIGITAL
OUTPUT
ANALOG
OUTPUT
TV
Signal flow
Connection
example
To COAXIAL type
digital audio input
Front
speaker
(right)
Front
speaker
(left)
Optical digital cable
Amplifier equipped with
a Digital Audio Input
To OPTICAL type digital
audio input
75 Ω coaxial cable
Warnings
• If you connect to the digital input of an amplifier that does not have a Dolby Digital decoder or DTS decoder, set the DPC-6.1’s
“Audio Out Select” function to “PCM.” Any other setting may damage your ears or speakers when using high volume levels.
• During playback of DTS-encoded audio CDs, excessive noise may be output from the ANALOG OUTPUTs. To avoid possible
damage to your audio system, we recommend you either break the connection between the DVD Changer’s ANALOG
OUTPUTs and the amplifier, or to only start playback of your DPC-6.1 after selecting the appropriate digital input source on
your amplifier.
• DTS Digital Surround™ playback is only available if you connect an external 5.1-channel DTS Digital Surround™ decoder to a
DIGITAL OUTPUT jack of the DVD Changer.
Connecting to an Amplifier Equipped with a DTS Decoder
Playback of DTS-encoded discs requires that you establish a digital connection with the amplifier. The selection of the
DPC-6.1’s DIGITAL OUTPUT depends on the type of digital input provided on your amplifier. Use either the DIGITAL
OUTPUT COAXIAL or OPTICAL connector. See the amplifier’s manual for details.
Digital Theater System (DTS)
DTS is a high-quality surround technology used in movie theaters
that is also available for home use on DVD videos or audio CDs. If
you have a DTS decoder or processor, you can obtain the full
benefit or 5.1-channel DTS encoded sound tracks.
• DTS functionality is only available when using DVD videos or
audio CDs with DTS encoding.
• Make the following settings:
Setting Select: Page
Audio Out Select Bitstream 36
Recording system DTS 29
• Select the DTS mode on your amplifier.
Digital Stereo Audio Playback
The DPC-6.1 also allows you to output a stereo audio signal in the
digital domain. The selection of the DPC-6.1’s DIGITAL OUTPUT
depends on the type of digital input provided on your amplifier. Use
either the DIGITAL OUTPUT COAXIAL or OPTICAL connector. See the
amplifier’s manual for details.
PCM
If your amplifier provides a digital audio input, you can establish a
digital connection between the DPC-6.1 and the amplifier. Choose
this type of connection if your amplifier is equipped with a better D/
A converter than your DPC-6.1, or if you also own a dedicated D/A
converter.
• Make the following setting:
Setting Select: Page
Audio Out Select PCM 36
Notes:
• NEVER connect a DIGITAL OUTPUT jack of the DVD Changer to
the AC-3 RF input of a Dolby Digital Receiver. AC-3 RF inputs use
a different encoding format that is not supported by the
DPC-6.1’s DIGITAL OUTPUTs.
• The amplifier’s coaxial digital input may be labelled “DIGITAL”
rather than “COAXIAL”. See its manual for details.
Connecting to an Amplifier Equipped with a Digital Audio Input
Amplifier equipped with
a DTS decoder
TV
Signal flow
Connection
example
To COAXIAL type
digital audio input
Front
speaker
(right)
Front
speaker
(left)
Optical digital cable
Surround
speaker (left )
Surround
speaker (right )
Sub-
woofer
To OPTICAL type digital
audio input
75 Ω coaxial cable
Center speaker