Filter
Top Products
Basic Operations
30
To slow the playback speed to exactly the pace you want, press PLAY, VCR1 or VCR2 on
respective mode, then press one of the VOLUME/SLOW buttons. Press VOLUME/SLOW ( )
to slow down, press VOLUME/SLOW (
) to speed up. The more times you press, the slower or
faster the slow motion.
If you want to minimize noise in slow motion playback, first set the VCR in still playback and
press VCR1 or VCR2, then press either of the tracking buttons (
or ) to minimize vertical
shaking.
Then set the VCR in slow playback and press VCR1 or VCR2, then press TRACKING buttons
to minimize visual noise bands on the screen.
After 5 minutes in slow motion playback, the VCR will stop the tape automatically to prevent
damage to the tape and the VCR.
To return to playback at a normal speed, press PLAY. To stop the tape, press STOP.
To Find Specific Sections on a Tape
Visual Search
This function lets you search backward and forward through the videotape while viewing it.
Using the remote control or buttons on the VCR:
• Press PLAY and REW to search in reverse.
• Press PLAY and then F.FWD to search ahead.
• Press PLAY again to return to to normal playback.
Searching with the Time Counter
During playback (and recording), a counter keeps track of how many hours, minutes, and
seconds the tape has run. When you first start playback, the counter shows briefly in the TV
screen's upper right corner.
When you want to check the counter during playback, there are several ways to do it. Pressing
DISPLAY on the remote control will cycle you through the three options.
• Press DISPLAY just once to see the counter, mode, time, and date on the screen for 5 seconds.
• Before the 5 seconds are up, press DISPLAY a second time to see just the counter. It will stay
on the screen.
• Press DISPLAY a third time to see the counter on the VCR display as well. ("M" will display
below the counter on the TV screen.)
• Press DISPLAY a fourth time to end the on-screen display.
The linear time counter operates only if there is something recorded on the tape.
The counter changes to 0:00:00 when the tape is ejected.
Marking with the Time Counter
If there is one part of the video that you want to return to, you can set the time counter to